JBL

Club 4505

Details
Item# CLUB4505-
Variations
  • Select Color
Product Actions
Add to cart options

Additional Information
At a Glance:
  • Compact size
  • High and low-level inputs
  • Variable crossovers and bass boost
  • ADAS Input
  • HALOsonic mixing input
What's in the Box:
  • 1 Club-4505 amplifiers
  • 4 High-level input wiring harnesses
  • 2 spare fuses
  • 2 2-color brand stickers
  • 1 Quick start guide
New high-performance JBL Club amplifiers deliver world-class JBL power from a compact chassis built to fit in more vehicles, even when space is tight. Available in 4-channel, 5-channel, and mono models, Club amps feature variable crossovers and bass boost for precise control and tuning, plus high and low-level inputs that let them integrate with most car stereos. They’re also compatible with several vehicle technologies, including many advanced driver assistance systems, and the Harman HALOsonic system, a suite of acoustic solutions that can simulate engine sounds for a better driving experience in hybrids and electric cars, cancel road noise for better-sounding music, and more.
Product Features:
  • Compact size
    JBL Club amplifiers feature a slim chassis and a small footprint to fit in more vehicles, even if available space is limited.
  • High and low-level inputs
    Speaker-level and low-level inputs let Club amps integrate with just about any car stereo, aftermarket or factory.
  • Variable crossovers and bass boost
    Unlike many amplifiers available at similar prices the JBL Club amps feature variable electronic crossovers and bass boost circuit to allow for fine-tuning.
  • ADAS Input
    The full range CLUB amps feature an ADAS input which overrides the audio signal when connected to ADAS accessories. In addition, ADAS alert routing location can be assigned during amplifier setup using the panel mounted control
  • HALOsonic mixing input
    CLUB can also work with the HALOsonic systems of select vehicles, which helps reduce external noise for a better sonic experience.
Highlights:
Manuals & Downloads:
General Specifications:
Signal-to-Noise Ratio(Full Range Channels)
>85dB (ref 1W output @ 4Ω)
Power Output, 4Ω(Subwoofer Channel)
320W rms x 1, <1.0% THD+N
Power Output, 4Ω(Full Range Channels)
45Wrms x 4, <1.0% THD+N
Power Output, 2Ω(Full Range Channels)
65Wrms x 4, <1.0% THD+N
Max Power
1800W Peak
Power Output, 4Ω Bridged(Full Range Channels)
130Wrms x 2, <1.0% THD+N
Power Output, 2Ω(Subwoofer Channel)
500Wrms x 1, <1.0% THD+N
Signal-to-Noise Ratio(Subwoofer Channel)
>80dB (ref 1W output @ 2Ω)

I have the Club 4505 amp, A set of Club 5000C, set of Club 6500C and 2 WS1200 woofers. My question is how would be best to hook up the 2 woofers to the woofer output on the amp? Which Ohm settings would I use on the amp and the woofer?

Asked by: Rick C
We would like to work with you directly to help with your inquiry. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Karl Vincent
Date published: 2018-09-30

wich is the diference between the REFERENCE 4555A INFINITY HARMAN AMPLIFIER 5 CHANNEL AND THE CLUB 4505 JBL HARMAN THEY COST THE SAME 299.95 SOMEONE WHO COULD HELP ME

Asked by: raicerda
Hi! Both amplifiers are the same in terms of audio specifications. The main difference between the two would be the materials that were used on the amps.
Answered by: Nick F
Date published: 2018-06-28

i have purchased this amp along side the s3 1124 subwoofer now since the sub can handle 500rms at either 2 or 4 ohms i dont understand what to switch it to as the power output of the amps says 320 rms at 4 ohms and 500rms at 2 ohms how do i wire it for 2

Asked by: Ryanry
Hi, and thank you for supporting JBL! The power handling of the woofer is independent of the impedance, so the 500 W is true no matter if you switch it to 2 Ohms or 4 Ohms. When the amplifier can handle a 2-ohm load, you may as well take advantage of the extra power it can produce into the lower impedance, and use the 2-ohm setting on the woofer. Please note that the lower impedance is a tougher load on the amplifier, so if you push your system to the limit, you may have the amplifier overheat or disconnect due to activating the protection curcuits because it is being driven too hard. If this happens, I would suggest to switch the woofer to the easier load of 4 Ohms. There is a switch on the woofer that you use to select 2 or 4 Ohms.
Answered by: Bo Harman
Date published: 2018-06-04

is this amplifier a D class?

Asked by: carlosedgoav
Yes, the Club 4505 is a class D amplifier.
Answered by: Steven M
Date published: 2018-04-18

Is the Subwoofer channel on this amp mono?

Asked by: Juggernaut78
The subwoofer channel on the JBL Club 4505 amp was designed as a mono output that can handle up to 320 W rms at 4 ohms or 500 W rms at 2 ohms.
Answered by: Steven M
Date published: 2018-03-29

Im planning on getting a Stage 1220B sub and 4 GTO 629 speakers for this amp would i need to upgrade my alternator?

Asked by: Dermy
We would like to work with you directly to help with your inquiry. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Steve S
Date published: 2018-03-22

I set this amp with 4 GX602s speakers and S2-1224SS subwoofer. What do you recommend for ohm setting of the sub? the amp can handle both 2ohms and 4 ohms setting, what ohm will I switch the subwoofer? Is there any difference in sound quality?

Asked by: Jan D
The S2 124-ss can only handle 275W RMS on either 2 ohms or 4 ohms, The Club 4505 has a subwoofer channel of 320W for 4 ohms and 500W for 2 ohms. The Subwoofer cannot handle the 2 ohm as it's too high but it can handle the 4 ohms rating even if it's above 275W but please be sure not to crank up the volume too much as it may damage the speaker in the long run.
Answered by: Mario at Customer service
Date published: 2018-03-22

What's the adas input phone jack for? Can I plug an bass remote level there?

Asked by: ERIC2600
If you have a car that has a Driver Assist system, where it will beep at you or talk to you if you are too close to another vehicle, or whatever, and you are about to remove your stock amplifier and replace it with the Club 4505, you can connect your Driver Assist system to this amplifier so that you continue to use that feature. Bass remote level controls are not compatible to be connected to this port.
Answered by: Steven M
Date published: 2018-03-11
  • y_2018, m_11, d_19, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_en_GB, sid_club4505-, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio

Search Result For ""