JBL

Club 4505

Details
Item# CLUB4505_
Variations
  • Select Color
Product Actions
Add to cart options
£254.99254.99 each £279.99 Save 9%

Additional Information
At a Glance:
  • Compact size
  • High and low-level inputs
  • Variable crossovers and bass boost
  • ADAS Input
  • HALOsonic mixing input
What's in the box:
  • 1 Club-4505 amplifiers
  • 4 High-level input wiring harnesses
  • 2 spare fuses
  • 2 2-color brand stickers
  • 1 Quick start guide
New high-performance JBL Club amplifiers deliver world-class JBL power from a compact chassis built to fit in more vehicles, even when space is tight. Available in 4-channel, 5-channel, and mono models, Club amps feature variable crossovers and bass boost for precise control and tuning, plus high and low-level inputs that let them integrate with most car stereos. They’re also compatible with several vehicle technologies, including many advanced driver assistance systems, and the Harman HALOsonic system, a suite of acoustic solutions that can simulate engine sounds for a better driving experience in hybrids and electric cars, cancel road noise for better-sounding music, and more.
General Specifications:
Signal-to-Noise Ratio(Full Range Channels)
>85dB (ref 1W output @ 4Ω)
Power Output, 4Ω(Subwoofer Channel)
320W rms x 1, <1.0% THD+N
Power Output, 4Ω(Full Range Channels)
45Wrms x 4, <1.0% THD+N
Power Output, 2Ω(Full Range Channels)
65Wrms x 4, <1.0% THD+N
Max Power
1800W Peak
Power Output, 4Ω Bridged(Full Range Channels)
130Wrms x 2, <1.0% THD+N
Power Output, 2Ω(Subwoofer Channel)
500Wrms x 1, <1.0% THD+N
Signal-to-Noise Ratio(Subwoofer Channel)
>80dB (ref 1W output @ 2Ω)

Is the Subwoofer channel on this amp mono?

Asked by: Juggernaut78
The subwoofer channel on the JBL Club 4505 amp was designed as a mono output that can handle up to 320 W rms at 4 ohms or 500 W rms at 2 ohms.
Answered by: Steven M
Date published: 2018-03-29

Im planning on getting a Stage 1220B sub and 4 GTO 629 speakers for this amp would i need to upgrade my alternator?

Asked by: Dermy
We would like to work with you directly to help with your inquiry. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Steve S
Date published: 2018-03-22

I set this amp with 4 GX602s speakers and S2-1224SS subwoofer. What do you recommend for ohm setting of the sub? the amp can handle both 2ohms and 4 ohms setting, what ohm will I switch the subwoofer? Is there any difference in sound quality?

Asked by: Jan D
The S2 124-ss can only handle 275W RMS on either 2 ohms or 4 ohms, The Club 4505 has a subwoofer channel of 320W for 4 ohms and 500W for 2 ohms. The Subwoofer cannot handle the 2 ohm as it's too high but it can handle the 4 ohms rating even if it's above 275W but please be sure not to crank up the volume too much as it may damage the speaker in the long run.
Answered by: Mario at Customer service
Date published: 2018-03-22

What's the adas input phone jack for? Can I plug an bass remote level there?

Asked by: ERIC2600
If you have a car that has a Driver Assist system, where it will beep at you or talk to you if you are too close to another vehicle, or whatever, and you are about to remove your stock amplifier and replace it with the Club 4505, you can connect your Driver Assist system to this amplifier so that you continue to use that feature. Bass remote level controls are not compatible to be connected to this port.
Answered by: Steven M
Date published: 2018-03-11

What type of 4awg amp kit would you recommend to install this product?

Asked by: ben_gabriel
Unfortunately we do not have our own wire kit that we can recommend but we do recommend buying a high quality wire to minimize voltage drops and maximize headroom. A good high quality power/ground cable should be made entirely of oxygen free copper and will typically be heavier than lower quality cables that may contain strands of aluminum or other metals.
Answered by: Mario at Customer service
Date published: 2018-02-01

what are the Dimensions of the Club 4505

Asked by: JGP1975
Hi! The dimensions of the Club 4505 is 400mm x 189.4m x 59mm, length, width and height.
Answered by: Gian at Customer Service
Date published: 2017-12-02

i Just bought the 5-channel 4505 and 4 club 6520 coaxial and 2 jbl club ws1200, can I run 2 jbl ws1200 on that 5th channel efficiently?

Asked by: Dmoeny55
Yes. Since the Club 4505 amp's sub channel can handle 500W at 2 ohms, what you can do is you can set the (2) WS1200 subs at 4 ohms for 500W and wire them in parallel to get 2 ohms. In that way, the amp can give out 250W to each sub which is perfect.
Answered by: Ren at Customer Service
Date published: 2018-01-06

Can this amp handle a 100A fuse?

Asked by: MarauderMan23
You can use a 100 amp fuse without issue. It may blow a little bit faster than it should, but that's only if you pushes the system to the hilt. For the most part it should not be an issue, but you can NEVER go over 105. That would be a huge problem, and dangerous.
Answered by: Mark at Customer Service
Date published: 2017-12-02
  • y_2018, m_4, d_20, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_GB, sid_club4505_, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio

Search Result For ""