Item# S2-1024_
  • Select Color
Product Actions
Add to cart options

General Specifications

Type 10" (250mm); subwoofer

Audio Specifications

Frequency Response 30Hz – 175Hz
Sensitivity 92 dB
Power Handling (Peak) 1000 W
Power Handling (RMS) 250 W


Cutout Diameter 9" (228mm)
Mounting Depth 5-5/8"; (142mm)
  • 1 ported enclosure
  • Owner’s manual
Series II enclosures deliver the enhanced efficiency and higher output of a vented enclosure, without the distracting noise or “chuffing” generated by a port. The patented Slipstream port dramatically reduces port noise at high sound pressure levels by minimizing airflow turbulence. With high-roll surrounds, proprietary cone design and long-excursion, Series II enclosures deliver deep, powerful bass, with greater accuracy than conventional ported boxes. And the exclusive SSI™ (Smart Selectable Impedance) switch lets you choose 2- or 4-ohm impedance for maximum configuration flexibility. It’s everything you want in a compact, easily installed enclosure.

Search Result For ""

S2-1024 is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Fantastisk lyd med muligheder. Jeg har købt nogle stykker af netop denne model, og jeg må ligge mig fladt ned. Jeg har endda brugt en af disse til at opgradere min Kenwood stationære subwoofer på mit hjemme sorround system. Jeg kan varmt anbefale denne til at booste lyden i et hvilket som helst anlæg.
Date published: 2017-03-31
  • y_2019, m_3, d_18, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_GB, sid_s2-1024_, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_harmanaudio

jeg har jbl stue højtaler der er 4 ohm, ville jeg kunne skifte bassen ud med denne

Asked by: jesperlauritsen
Hej Jesper. Det kan desværre ikke lade sig gøre. Bilstereo basenheder er bygget til at arbejde i en helt anden størrelse kabinetter end hifi-basenheder, og denne model vil spille meget ringe i et normalt hifi kabinet. Den bedste løsning er nok at kontakte Harman Helpdesk, og få en henvisning til det servicecenter, som kan sælge reservedele. Hvis din højttaler er meget gammel, kan man måske ikke få erstatningsenheder mere. Hvis der er tale om at din bas har en skumkant, som er nedbrudt, kan du få skiftet skumkanten alene hos et af de firmaer, som specialiserer sig i dette. Dem kan du let finde på nettet.
Answered by: Bo Harman
Date published: 2018-04-16

Hi! What volume in Cubic Millimeters that the subwoofer occupies inside the box? I haven't saw this information at the product specifications sheet. Thanks!

Asked by: DioRicardo
The driver displacement of the S2-1024 is 0.1 cubic feet or 2,832,000 cubic millimeters. The designs that we provide on our tech sheets and manual already take the driver displacement into account, so you don't need to.
Answered by: Steven M
Date published: 2018-09-09

If I get 2 1024's and want a sealed box what's the ultimate size box? Plus total rectangle or slanted in the back?

Asked by: Joeysolar
You might find the answer to your question in our Product Support FAQ and knowledge base sections. The link is located at the top of this page. To submit a support case, please fill out the Contact Us form at the same location.
Answered by: Ren at Customer Service
Date published: 2018-01-07

Følger der et kabinet med til subwooferen? Er lidt i tvivl nemlig.

Asked by: Kims
Hej. Jeg kan godt se, at det er forvirrende. Der er ikke noget kabinet med. Prisen dækker for en subwooferenhed alene, og kabinettet skal man så selv bygge. Beklager at det ikke er særlig klart på hjemmesiden.
Answered by: Bo Harman
Date published: 2017-12-02

Will 2 of these work with a 2.05 cu.in. vented box tunes to 36hz?

Asked by: Svisathep
This will work but it is not the optimum design for the S2-1024 and it will likely choke out easily, if you are pushing it too hard. The recommended volume for vented-box of S2-1024 is 1.5 cubic foot.
Answered by: Drin at Customer Service
Date published: 2018-04-28

I have a 2015 Camaro convertible, it has a subwoofer located behind the rear seat, free air style. Would this subwoofer work well in that configuration?

Asked by: drbll
No. The S2-1024 subwoofer is not recommended for free-air application and building an enclosure is strongly advised. The S2-1024 is suitable for sealed and vented boxes.
Answered by: Joe G at Customer Service
Date published: 2018-04-02

Would this sub be ok in a box that is 15ltrs in volume (sealed) and with a mounting depth of 144mm?  It lists the depth as 142mm is that going to be too tight a squeeze

Asked by: Banty139u
Hi. This should be fine. Sealed boxes are not very critical, and as you can see, 142mm is from end of magnet to front of chassis, so if you mount the woofer from the outside of the cabinet, you will have space to spare behind it. If you plan a countersunk woofer, you are close to the limit, but it should be fine.
Answered by: Bo Harman
Date published: 2017-12-02

how do i calculate the specifications from litres to mm for this sub from the manual

Asked by: raven
I assume you're referring to the Sealed and Vented box volume. If this is the case, for Sealed box volume, it would be 14158423.3 Cubic Millimeters and for Vented box volume, it would be 42475269.9 Cubic Millimeters.
Answered by: Joe G at Customer Service
Date published: 2017-12-02
  • y_2019, m_3, d_19, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_GB, sid_s2-1024_, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio