JBL Stage 1210 Subwoofer

Item# STAGE1210
Product Actions
Add to cart options
£69.9969.99 each

In stock. Estimated delivery time 2-4 business days

General Specifications

Power Handling 250Wrms, 1000W peak
Sensitivity (@2.83V) 91dB
Frequency Response 34Hz - 200Hz
Voice Coil Diameter 2 in. (50.8mm)
Impedance 4 ohms
  • 1 x Subwoofer
  • 1 x Foam gasket
  • Owner’s manual
  • 2 x two-color brand stickers
Price leading JBL Stage car subwoofers were engineered to deliver high-output, low-distortion bass with power handling capability of up to 1000 watts peak power. (Available in three sizes—8" (200mm), 10" (250mm), 12" (300mm)—for every size vehicle from compact to limo.) These subwoofers feature lightweight yet stiff polypropylene woofer cones with hi-roll rubber surrounds to provide high-efficiency and super durability to best interface with a variety of amplifiers. Finally, our subwoofers and loudspeakers are individually tuned by some of the world's best transducer engineers to ensure we achieve the signature sound that is unmistakably JBL.

Manuals & Downloads

The latest owner's manuals, quick start guides, and documents.

Search Result For ""

JBL Stage 1210 Subwoofer is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Hij is groot, mooi en zwaar Ik heb er 2 gekocht en ga ze gebruiken in m’n home theater op het LFE kanaal.
Date published: 2018-03-26
  • y_2019, m_6, d_15, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_GB, sid_stage1210-, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_harmanaudio

What is the recommended enclosure size?

Asked by: Chris8503
For a Seal enclosure, you'll need to have a box with a volume of 1.4 cu ft(40 liters). For more information, you can check on the owner's manual under manuals & downloads on the page below. https://www.jbl.com/car-subwoofers/STAGE+1210-.html
Answered by: Mario at Customer service
Date published: 2019-04-21

Kan man bruge denne subwoofer som en almindelig bas-enhed?

Asked by: Kristian K 24
Hej Kristian, Tak for dit spørgsmål. Du kan sagtens bruge den som almindelig bas-enhed, men du skal bygge et kabinet for at kunne få fuld udnyttelse af produktet. Normalt vil du i en bil bygge et udtag eller box subwooferen kan sidde i, det samme skal du også gøre hvis du vil bruge den til andet end i en bil.
Answered by: Danny HARMAN
Date published: 2019-01-09

Hello, can i put this in a JBL home sub box as a replacment..i can block the port if need be, but i think these are free air. Thanks, jeff

Asked by: Stereohead
Hi! The JBL Stage 1210 is not a free air speaker and we do not recommend using it as a home speaker because there is a huge difference in terms of impedance. It could push and blow your amp and speaker.
Answered by: Nick F
Date published: 2019-01-28

Hi! Can I use this woofer with ported box, or only sealed ?

Asked by: JoeBacsi
Hi! Yes the JBL Stage 1210 will also work in a ported box.
Answered by: Nick F
Date published: 2018-06-22

I have a JBL 1210 subwoofer will this subwoofer be ok with a GTO-1001EZ amp?

Asked by: Carlos1987
No, The Amp would be overpowering the subwoofer since the Speaker can only handle 250W RMS at 4 ohms while the Amp drives 650W @ 4 ohms.
Answered by: Mario at Customer service
Date published: 2018-06-02

I bought the JBL GTX 500 mono amp to power a single JBL Stage 1210 sub. Is it a good combination or too much?

Asked by: DrDelgado7
The GTX500 should work fine with the Stage 1210 subwoofer.
Answered by: Steven M
Date published: 2018-02-08

What kind of amp would I need for the dual 12” sub enclosure?

Asked by: Jeepy
The JBL GX-A3001 would be good for the JBL Stage 1210 Subwoofer as the GX amp can drive 200W at 4 ohms and the Stage 1210 can handle 250W at 4 ohms.
Answered by: Mario at Customer service
Date published: 2018-01-25

Im buying two of these and putting them in a bass enclosure, im getting a BOSS audio amp that has 4 channels and is 1000w. Would that power both at the same time or would i need a 2000w amp

Asked by: Jeep454545
The JBL stage 1210 subwoofer can handle an average of 250W with 1000W is the peak power that it can handle. If the amp that you have provides 1000W per channel the it would be too much for the Sub, but if the amp provides 250W per channel x4 with a max power it can provide is 1000W then the 2 Subs would be good for your amplifier. If this does not answer your question , please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Mario at Customer service
Date published: 2018-06-02
  • y_2019, m_6, d_14, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_GB, sid_stage1210-, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio