JBL Stage 1210 SubwooferDetails https://uk.harmanaudio.com/jbl-car-subwoofers/STAGE+1210_.html
Item# STAGE 1210_
Additional InformationPrice leading JBL Stage car subwoofers were engineered to deliver high-output, low-distortion bass with power handling capability of up to 1000 watts peak power. (Available in three sizes—8" (200mm), 10" (250mm), 12" (300mm)—for every size vehicle from compact to limo.) These subwoofers feature lightweight yet stiff polypropylene woofer cones with hi-roll rubber surrounds to provide high-efficiency and super durability to best interface with a variety of amplifiers. Finally, our subwoofers and loudspeakers are individually tuned by some of the world's best transducer engineers to ensure we achieve the signature sound that is unmistakably JBL.
Price leading JBL Stage car subwoofers were engineered to deliver high-output, low-distortion bass with power handling capability of up to 1000 watts peak power. Available in three sizes—8", 10", 12"—for every size vehicle from compact to limo.
At a Glance:
Three Sizes for All Applications, Environments and Budgets
Highest Grade Materials for Super Reliability
HARMAN standard Reliability Testing
JBL at an Affordable Price
What's in the box:
1 x Subwoofer
1 x Foam gasket
2 x two-color brand stickers
- Power Handling
- 250Wrms, 1000W peak
- Sensitivity (@2.83V)
- Frequency Response
- 34Hz - 200Hz
- Voice Coil Diameter
- 2 in. (50.8mm)
- 4 ohms
JBL Stage 1210 Subwoofer is rated out of 5 by 1.
Rated 5 out of 5 by Roy 62 from Hij is groot, mooi en zwaar Ik heb er 2 gekocht en ga ze gebruiken in m’n home theater op het LFE kanaal.
Date published: 2018-03-26
I have a JBL 1210 subwoofer will this subwoofer be ok with a GTO-1001EZ amp?
No, The Amp would be overpowering the subwoofer since the Speaker can only handle 250W RMS at 4 ohms while the Amp drives 650W @ 4 ohms.
Date published: 2018-04-19
I bought the JBL GTX 500 mono amp to power a single JBL Stage 1210 sub. Is it a good combination or too much?
The GTX500 should work fine with the Stage 1210 subwoofer.
Date published: 2018-02-08
What kind of amp would I need for the dual 12” sub enclosure?
The JBL GX-A3001 would be good for the JBL Stage 1210 Subwoofer as the GX amp can drive 200W at 4 ohms and the Stage 1210 can handle 250W at 4 ohms.
Date published: 2018-01-25
Im buying two of these and putting them in a bass enclosure, im getting a BOSS audio amp that has 4 channels and is 1000w. Would that power both at the same time or would i need a 2000w amp
The JBL stage 1210 subwoofer can handle an average of 250W with 1000W is the peak power that it can handle. If the amp that you have provides 1000W per channel the it would be too much for the Sub, but if the amp provides 250W per channel x4 with a max power it can provide is 1000W then the 2 Subs would be good for your amplifier. If this does not answer your question , please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Date published: 2017-12-02
Search Result For ""